View Full Version : Help!!!!

06-09-2010, 12:28 PM
Ok i need some help here. i just got my parts from th custom saber shop. Here they are


MHS to 1.5" sink tube adapter

Screw on LED blade holder style 1

5 degrees lens

REBEL?!?!? LED Lens holder.


I cant seem to fit the REBEL on to the Luxeon.

06-09-2010, 12:42 PM
your missing an optics holder...


06-09-2010, 12:47 PM
Thats the problem i have the REBEL led holder not the Luxeon.

06-09-2010, 12:51 PM
you can modify the holder to fit the lux III/p4, just take the round out of the bottom of it, tabs will still line up to the star and the clips will hold the lens

06-09-2010, 12:55 PM
SORRY! I just got the black lux holder.

06-09-2010, 12:59 PM
either black or clean lux III / V / p4 lens holders have a channel that fits around the star to emitter connections, so it only goes on one way, this allows for the wire leads to the switch and negative to come out under the holder, as well as protecting the emitter...

06-09-2010, 01:18 PM
Thank you. I finally figured out what happened thank you.