View Full Version : MR Blade Length
Hitogiri
06-08-2006, 09:05 AM
How far down into the hilt do the stock MR blades go? Does it very by model?
Thanks
Brian
james3
06-08-2006, 09:23 AM
About and inch and three quarters to 2 inches for the Vader, seems about the same maybe a touch less with the Windu. I will check again to make sure cause I am just shooting from memory and I haven't done the others yet.
<center>http://i43.photobucket.com/albums/e370/Dadof3/obiwan4.jpg</center>
headwound
06-09-2006, 08:24 AM
it seems to be at least 2 inches for the anakin
Hitogiri
06-11-2006, 01:35 PM
Thanks guys for the info!
jadedknight
06-27-2006, 03:35 PM
overall length is 35" so 33" inches is exposed and 2" in the hilt give or take a fraction of an inch
Powered by vBulletin® Version 4.2.3 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.