PDA

View Full Version : Just a quick parts check



Causa
05-10-2010, 11:15 AM
MHS choke style 1 short 1 $9.00
MPS Pommel style 6 1 $6.00
Nickel Plated Momentary Switch 1 $10.30
10-32 x 1/4" set screw 1 $0.20
2.1mm Power Jack 1 $2.50
MPS Clip 1 $0.79
Hilt style 4 with standard style 1 30.00
(combined the 23 and the 7 dollar charge)
Recharge port hole service 1 $7.50
Machine switch hole 1 $7.00
Powder Coating 1 $17.50

This is what I've ordered already.

Stuff that I know I need:
Pommel insert 12 (the cool new one)
blade holder style 9 or 10. it's a daily debate.
Rebel Green LED
Cannon 2.1 male for charging solution
batteries (18500's and assorted parts coming from elsewhere)
Corbin show blade 36 quad wrapped because that looks hard to do.
Lens and Lens holder
thermal tape
Allen wrench for pommel cap 12
allen wrench for set screw above

((I just wanted to add that it's so much fun to make this post, because posting in the Parts List forum takes cash ;) ))

Shadar Al'Niende
05-10-2010, 01:53 PM
If when you say "elsewhere" you mean DX for the batteries? expect a month and a half wait... No joke...

Causa
05-10-2010, 01:56 PM
DX? no clue which site that is. I just didn't elaborate because I try not to mention other hobbyist supply sites on here.

Plus since the order I placed has a lot of drilling, powdercoating, etc, I placed it intentionally well ahead of the rest.

I am working on my MHS saber here, and costuming stuff on other sites, so my money is split two ways...probably going to receive the first order before placing the second.

Shadar Al'Niende
05-10-2010, 01:59 PM
ok, if you are not familiar with DX don't worry about it,


"I just didn't elaborate because I try not to mention other hobbyist supply sites on here."

i was purposefully vague for the same reason :grin:


This is not the post you are looking for...:cool:

Causa
05-13-2010, 09:02 PM
Okay out of the above list, I ordered:


blade holder style 10
Rebel Green LED
Lens and Lens holder
Allen wrench for pommel cap 12
allen wrench for set screw above

I am waiting for pommel 12 to come back in stock, plus the new Rebel thermal tape/spacer solution. Also waiting on the 2.1 cannon male. The batteries are on the way, but I will probably grab another PCB from this store, because I think I ordered the wrong one from another store.

I'll order the blade with the final order for this saber.

anything else? Tim is doing all the drilling and tapping and laborious

Causa
06-01-2010, 07:29 PM
double post since it's been awhile and because I am slightly altering the build.

Okay, I already knew that I still needed:

Pommel insert 12 (the cool new one)
Cannon 2.1 male for charging solution
Corbin show blade 36 quad wrapped because that looks hard to do.
thermal tape

But I've remembered that I also need:

Copper spacer for rebel,
TCSS Premium Speaker
Smart Charger for Li-Ion
replacing the resistor above with the adjustable driver
kill plug

To recap this whole thread, I have:

* 1 of: Luxeon Rebel Lens Holder
* 1 of: Luxeon Collimator Lens 8.7 deg viewing angle
* 1 of: Luxeon Rebel Star (Green)
* 1 of: Screw on LED blade holder style 9
* 3 of: 2 Wire quick connector
* 1 of: 1.2ohm 3w resistor
* 1 of: 1/8" Adhesive lined heatshrink tubing
* 1 of: Dual 22 gauge wire
* 1 of: 26 gauge wire (Black)
* 1 of: 26 gauge wire (Red)
* 1 of: 5/64" Allen wrench
* 1 of: Drill & Tap Hole (10-32)
* 1 of: MHS choke style 1 short
* 1 of: MPS Pommel style 6
* 1 of: Nickel Plated Momentary Switch
* 1 of: 10-32 x 1/4" set screw
* 1 of: 2.1mm Power Jack
* 1 of: MPS Clip
* 1 of: Hilt style 4 with standard style switch hole
* 1 of: Recharge port hole service (Style 1)
* 1 of: Machine switch hole in MHS section (illuminated)
* 1 of: Powder Coating (Copper Jacket Metallic, SH43)

This is what I know I need:

Pommel insert 12 (the cool new one)
Cannon 2.1 male for charging solution
Corbin show blade 36 quad wrapped because that looks hard to do.
thermal tape
Copper spacer for rebel,
TCSS Premium Speaker
Smart Charger for Li-Ion
replacing the resistor above with the adjustable driver
kill plug

can anyone find something I'm forgetting?
considering I already missed like five things, I'd prefer some more experienced eyes.


Thanks all,

Causa