yell0w_lantern
04-18-2010, 02:35 PM
I have been trying to wire up one of the Cheapy Hasbro boards to a Lux Rebel. Unfortunately, I can't get the LED to light. I've tug tested the wires and they seem fine. My next thought is that I have wired the Relay incorrectly. I Y-split the battery pack to the sound board and positive to the relay with the negative going to a resistor prior to the LED.
Here is how I have the Relay wired:
http://i6.photobucket.com/albums/y223/yell0w_lantern/WiredRelay01a.jpg
It's from the diagram on the back of the relay package. I took it to mean that the bottom right terminal would make a circuit with the upper left when the coil was not energized but when the coil was energized it would contact with the upper right terminal.
Did I read this wrong?
I would greatly appreciate any help.
Here is how I have the Relay wired:
http://i6.photobucket.com/albums/y223/yell0w_lantern/WiredRelay01a.jpg
It's from the diagram on the back of the relay package. I took it to mean that the bottom right terminal would make a circuit with the upper left when the coil was not energized but when the coil was energized it would contact with the upper right terminal.
Did I read this wrong?
I would greatly appreciate any help.