project graflex

[ztrox93]

Has anyone made a project graflex if so, have you converted it to an el or led?If you did what did you use for the emiter?

Zach Watkins

[987654321a]

http://www.thecustomsabershop.com/sabers/Scripts/prodView.asp?idproduct=119

http://www.thecustomsabershop.com/sabers/Scripts/prodView.asp?idproduct=118

try to look around in the store or forums before posting these kind of topics

I DONT KNOW WHAT WE'RE YELLING ABOUT!!....LOUD NOISES!!!
www.starwarscustoms.bravehost.com
http://img70.imageshack.us/img70/3606/logotwo7cw.png

[Nightwing]

Woah!!!

I was gonna post a couple of links to the store and scold the guy, but Countdown beat me to it!!! Wow!!!

[xwingband]

Those links won't work for him because they are for the Graflex itself. Assuming he's refering to the "Project Graflex" site then that is based on the 1.5" sink tube. In that case order the standard sink tube blade holders and look at Jonitus' topic stikied here. Basically you'll have to dremel out some stuff if you want accurate switches or put them elsewhere.

<center>Read the FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552) or x-wing won't be happy. :(
Before posting did you check the Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577)?.

http://img508.imageshack.us/img508/6703/xwing8az.gif</center>

[987654321a]

yesssssss, victory feels good[}:)]

Edit- i think he's talkin bout a real graflex conversion

I DONT KNOW WHAT WE'RE YELLING ABOUT!!....LOUD NOISES!!!
www.starwarscustoms.bravehost.com
http://img70.imageshack.us/img70/3606/logotwo7cw.png

[ztrox93]

I know what you guys mean but I dont mean an actual graflex i mean Project Graflex it is hand made and is not an actual graflex and I'm making one and I want to make it El or Led.

Zach Watkins

[987654321a]

o ok, well go with xwings suggestion and welcome to the site![:)]

I DONT KNOW WHAT WE'RE YELLING ABOUT!!....LOUD NOISES!!!
www.starwarscustoms.bravehost.com
http://img70.imageshack.us/img70/3606/logotwo7cw.png

[xwingband]

In that case the topic stickied should do you well. The hitch is the switch. If you want you could probably cut the top off the blade holder to have the sheet metal "bulb clamp" be there or use the blade holder as is... whatever works for you.

<center>Read the FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552) or x-wing won't be happy. :(
Before posting did you check the Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577)?.

http://img508.imageshack.us/img508/6703/xwing8az.gif</center>

[LAN-ED-TUL]

if he's not wanting sound he can put the holder flush with bottom edge of s curve. i did that in a real graflex with tims holder, for led but i had sound in mine. and it was a real graflex, but the principle is the same. as far as the switch, there are red buttons with a momentary or latching switch put in them. he could use one of those, depending on if its el or led to which type he would use.

<center>http://i29.photobucket.com/albums/c291/LAN-ED-TUL/LANSIG.jpg</center>

Lan-Ed-Tul
The Brotherhood Of The Sith

You dont know the POWER, of the dark side...

[ztrox93]

Hey x-wingband what blade holder? and thank you all for the suggestions.

Zach Watkins

[Ambo]

Everything can be found in the store found at the link at the top/middle of the page, what u will be looking for is the MHS blade holder style 1. Just look under the MHS section in the hilt section.





<center>http://i75.photobucket.com/albums/i313/AmboAW/Hammy.jpg</center>RJ: No, Hammy, not the cookie. I told you that cookie was garbage.
Hammy the Squirrel: But I like the cookie.

[xwingband]

What he said.^^^ The holder sold here is just the thing you need to finish the job.

<center>Read the FAQ (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=552) or x-wing won't be happy. :(
Before posting did you check the Thread Index (http://www.thecustomsabershop.com/sabers/forum/topic.asp?TOPIC_ID=577)?.

http://img508.imageshack.us/img508/6703/xwing8az.gif</center>

[ztrox93]

thank u

Zach Watkins