PDA

View Full Version : My parts list



Darth Reklar
04-05-2010, 08:09 PM
OK, I am going to be building an LED MHS saber using one of the El-Cheapo Vader sound boards. Here's my electronics list so far:

SPST Momentary Guarded switch with silver button
Luxeon III/V Lens Holder
Seoul P4 (White)
Luxeon Collimator Lens 5 deg viewing angle
4AAA battery holder
BuckPuck 1000mA 4-wire
Premium Speaker
2 Wire quick connector (for LED end)
4 Wire quick connector (for speaker end)
Swing Sensor (at cardcollector's suggestion)

Additionally, I'll be picking up a transistor from another vendor, at cardcollector's suggestion. All of the above will be going into a 7" MHS hilt with choke, pommel and blade holder.

Did I miss anything?

Shadar Al'Niende
04-05-2010, 08:17 PM
You should start your own post, not use someone elses.

Darth Reklar
04-05-2010, 08:18 PM
You should start your own post, not use someone elses.

My apologies... I'll do that next time.

Split the thread for you - LM

Darth Reklar
04-06-2010, 06:51 PM
Recommended thumb screw length for blade retention screw on a LED blade holder style 7? I'd like for it to screw in all the way when the blade is in.

Jedi-Loreen
04-06-2010, 10:26 PM
That's a pretty thin blade holder, whichever you get, you're going to have to cut it down.

FenderBender
04-07-2010, 05:01 AM
5 Degree? Why does every noob go with the 5 degree?

cardcollector
04-07-2010, 07:30 AM
5 Degree? Why does every noob go with the 5 degree?

Because they work....

but not as good as 10 degree...;)

Besides, I like the number 5 better than 10...:rolleyes:

Shadar Al'Niende
04-07-2010, 03:40 PM
i like 10 better than 5, its twice as good ;)

Darth Reklar
09-15-2011, 01:26 PM
5 Degree? Why does every noob go with the 5 degree?

I think that's what Tim puts in the P4 kits.