Mag-litesaber

[Goltar Bias]

Here is my attempt at useing the maglite blade holders that have reccently come out on TCSS. I wanted to build something that would pass as a saber and could be easily converted back to a flashlight. I must say that these blade holders are a very brilliant idea especialy for makeing stunt sabers.

So here's the parts:
Maglite 2 d cell
TCSS d cell maglite blade holder
Diamond-led K2 green conversion bulb
5 degree lense and holder
1.25" conduit hub insulated throat from home depot (pommel)
1.5" sinktube overlay
1.5" slip joint washers

http://i733.photobucket.com/albums/ww338/nefreeze/maglite%20saber/100_0718.jpg
http://i733.photobucket.com/albums/ww338/nefreeze/maglite%20saber/100_0712.jpg
http://i733.photobucket.com/albums/ww338/nefreeze/maglite%20saber/100_0713.jpg

Shot two pics of it turned on, the first one is with the TCSS trans-green polyc blade with cellowrap in it the second is a thick wall clear polyc with cellowrap and glass frosting spay on outside. Might be brighter with thin wall.

http://i733.photobucket.com/albums/ww338/nefreeze/maglite%20saber/100_0715.jpg
http://i733.photobucket.com/albums/ww338/nefreeze/maglite%20saber/100_0717.jpg

Let me know what you think.

[Lawrs1]

I'm think that has turned out rather well, I'm really quite liking it

[Do-Clo]

That turned out nice

[E-relivent]

That must be really heavy.

[revan1138]

Wow! And I was underestimating the Mag light conversions.

[Goltar Bias]

That must be really heavy.

Not as bad as you might think, it is acctualy rahter well balanced. And total cost is a little less then 70 bucks give or take shipping and sales tax.

[Kal El Rah]

GB you did an excellent job with that and you have shown that with the new parts available from tcss that a very well thought out saber can be made, KUDOS to you.;):p:cool:

[Rhyen Skytracker]

Awesome job with the mag-litesaber.