PDA

View Full Version : hasbro cheap speaker question


runner4life
03-11-2010, 08:27 PM
When i first hooked up my soundboard and all that jazz. The sound was crisp and sharp. Now i made some switch modifications. And put the sound together again it is all dull and crusty sounding?

help please?
Jedi-Loreen
03-11-2010, 08:53 PM
More information needed.

What "switch modifications" did you do?
runner4life
03-11-2010, 09:32 PM
i jst added a new momentary switch. Nothing new jst different.
Jay-gon Jinn
03-11-2010, 10:25 PM
check the speaker for damage....they sound all "dull and crusty" when the membrane gets damaged.
Kal El Rah
03-14-2010, 01:43 PM
As Jay said, the speaker is history, get another good quality speaker like the 1's sold here at tcss store:

http://www.thecustomsabershop.com/Premium-Speaker--P77.aspx
Jedi-Loreen
03-14-2010, 02:41 PM
I damaged the speaker in my Hasbro Rebel Blaster when I took the blaster apart to remove the sound board to use it in my Nerf Recon modification. It sounded crackly and wasn't very loud anymore, after it had sounded nice and crisp and loud, inside the blaster originally.

So I ended up using a TCSS premium speaker that I had.
runner4life
03-15-2010, 09:20 PM
i know this isnt allowed. BUT! i live in Australia its not feasible to buy less than $100 worth of stuff to ship here cause shippings expensive..so i might buy local...there like $2.95 so tims not missing out,

http://www.jaycar.com.au/productView.asp?ID=AS3002&CATID=15&form=CAT&SUBCATID=621

is this good?
cardcollector
03-16-2010, 05:58 AM
It will work but remember...

You get what you pay for.
Jedi-Loreen
03-16-2010, 01:12 PM
It looks ok. Try it and find out.
Rivenshield
03-16-2010, 04:31 PM
As Jay said, the speaker is history, get another good quality speaker like the 1's sold here at tcss store:

http://www.thecustomsabershop.com/Premium-Speaker--P77.aspx

Car audio geek here: What are the stats for that little speaker? Frequency response, sensitivity, etc.? Anybody know?
Jedi-Loreen
03-16-2010, 04:51 PM
I don't think they usually give all that much info on the little "hobby" speakers like that.
Novastar
03-25-2010, 11:37 AM
For a Hasbro "el cheapo" board, most any little speaker will do the trick since the board output is like 4 bit or 8 bit or something.