PDA

View Full Version : Star heatsink/holder/lens mount thingy that may be of interest



TroyO
03-03-2010, 04:26 PM
Looks like it's 19mm, or about 3/4" across. It's spendy at $16, but maybe it could make forr sleek saber design that's barely bigger than the blade or something?

http://my.mouser.com/ProductDetail/Tyco-Electronics/2008675-1/?qs=jJIL5Dlg2FsuhsoDznuThQ%3d%3d

Strydur
03-03-2010, 04:56 PM
Not sure why they dont list the specs but I have one and it is around 1.5" in diameter and I dont think they have narrow degree lens's. This holds star LED's which are around 3/4 in diameter so not sure how you came up with 3/4" across for the whole assembly.

Rhyen Skytracker
03-03-2010, 05:26 PM
I should have known that Tim had already tested that one. You can't get anything past him. LOL

TroyO
03-03-2010, 06:07 PM
Ahhhh..... looks like they dimensioned a star in the drawing. Sorry about that... that's where I got the 19.9MM dimension.

Sorry! LOL, damn and it looked so usefull! Well, for something... anyway.