PDA

View Full Version : New Saber for a New Smith



Fellstrike
03-01-2010, 10:47 PM
Here's my parts list:

guts:
4AA Battery holder
Luxeon III Cyan
Collimator Lens 10° viewing angle
2.2ohm 5w resistor
Push on/push off switch with red button
Luxeon III/V Lens Holder
8-32 x 3/8" Red Acetal thumb screw

hilt:
7" Fluted with standard style switch hole
blade holder style 1
MPS Insert style 2
MPS Pommel style 1
MPS Clip

34" TCSS Battle Blade 1"


So am I missing anything?

Invisas1979
03-02-2010, 05:26 AM
Here's my parts list:

guts:
4AA Battery holder
Luxeon III Cyan
Collimator Lens 10° viewing angle
2.2ohm 5w resistor
Push on/push off switch with red button
Luxeon III/V Lens Holder
8-32 x 3/8" Red Acetal thumb screw

hilt:
7" Fluted with standard style switch hole
blade holder style 1
MPS Insert style 2
MPS Pommel style 1
MPS Clip

34" TCSS Battle Blade 1"


So am I missing anything?

I'd probably add some quick disconnects to that. Maybe a alumi switch bezel for that particular switch, they look nicer.

Also, though you may not be putting sound in it, I'd have the speaker attachment added to the list as this will stop the batteries moving around in the hilt, when glued to the 4aa battery holder.

If you then want to add sound later you only need a board and speaker (well pretty much).