K2 or Luxeon III?

[Robin_9o]

I can´t decide wether i am going for The K2 or Luxeon III. What would you recommend? What is the best choice?

[DarkLordRevan]

It depends on your project... a K2 might be better than a Luxeon III ( i dont know) but if you cant give it the minimum amount of amp that it needs, then maybe Luxeon III is where you should go

[Count Malik]

http://www.thecustomsabershop.com/wiringbuilder/wiring.aspx

It depends on what color you want if you want green then go for the k2... run times like the lux. III but with more lumens. just look at the guide above! ;)

Now on a side note- some k2s can be a bit hard to solder ;)

[FenderBender]

Niether, you should go with a P4 ;)

[Count Malik]

Niether, you should go with a P4 ;)

Totally forgot to mention the p4! lol yes the p4's are sweetly awsome!8)

[Dakarn]

Niether, you should go with a P4 ;)

Dang, does that mean I should swap my Cree XR-E green for a Seoul P4 green?

[Count Malik]

never have seen a cree (at least i don't think) so i couldn't tell ya lol sorry but i do know that the p4s are never a bad choice

[Vos Malek]

Dang, does that mean I should swap my Cree XR-E green for a Seoul P4 green?

Depends on how much current you're running. The crees are comparable to the P4s at 1000-1200ma. I've used both and like them about equally.

At lower currents (350-700ma) the crees will do much better.

[DJMoonbass]

you could always try the LEDengin 5 watts. pretty much same power requirements as P4 or lux 3. i dunnno for some reason im drawn to them.