- Tri-Rebel Alternative Heat Sink?
- tri-rebel in series which buckpuck?
- Chat room Wednesday!
- Battery/Wires questions
- AV LED Button Wiring Question
- PC 3.5 FoC Voltage Question: 3.3V or 7.4V?
- Switch question
- crossguard saber wiring help
- Battery placement question
- Petit Crouton issue. No constant LED, but constant activates on FoC
- Any reason why I couldn't do this? (RICE port grounding)
- Help for richarge port and latching switch!
- Fitment between batteries and box 12??
- Wiring Check: Prizm + Tri-Rebel R/G/B
- wiring latching LED AV switch to MR vader board
- Color Extender "creative" hilt placement
- Cree XPE2, Buckpuck, 7.4 v Li-Ion, standard latching switch diagram
- Rumored Tri-Cree, Battery Needs?
- Chat room Wednesday! Again!
- Does this seem right?
- Tri-rebel setup
- Tri-Rebel Wiring Diagram with NB Manual
- Wiring Double-Check
- How to make the sequence of accent led?
- Wiring a Buckpuck w/ a Pololu
- Ravenwood Saber
- Stupid Cree/Luxeon Question
- Wiring check for a PC 3.5 dedicated blue blade
- Nano Biscotte Sound Module V2 Wiring Check
- Crystal Focus LS V6.5
- Indicator on LED
- Chat room Wednesday!
- PC v3.5 + Tri cree RGB led
- New to Lightsaber Scene -- building new lightsaber
- crystal chamber led
- Hasbro Card Problems
- Wiring Check: Nano Biscotte with Accent LED Switch
- Help with Resistor Value(s) for sound saber build
- Making a custom accent LED housing
- PC v3.5 LED wiring
- How to create sequences of accent LED??
- Just double checking some things.
- Led Wiring question
- Need Some Wiring and component Help!
- Wiring green Tri-Cree XP-E2
- momentary to latching converter help
- Building 2 budget Sabers and need some help
- First Sound Card Build: Question regarding the new Tri-Crees
- Resisting Cree's vs. Rebels
- Nano and Recharge Troubleshooting Advice
- Need help wiring momentary switch
- LED wiring
- Wiring Check: Tri-Cree, Accent LED Switch, NBv2, FoC
- Buckpucks vs. resistors
- Shoto About to Get Real
- Purple Blade + White FoC Method
- Wiring Check: Prizm 3.5, RGB TriCree, Accent LEDs
- NBv2 + PeX2.0 Wiring Check
- MR ROTJ + Polalu +Recharge
- Single Cree vs Tri-Rebel
- Wiring Check Request (Cree XP-E2 + PC 3.5)
- Green Tri-Cree test fail?
- Battery Pack Question.
- Checking on the meaning of "idle" for accent LEDs
- Wiring check for my second saber.
- SMD resisitors
- im so lost
- NBv2 + PEX wiring check?
- AV switch light not working
- Advice needed - simple rechargeable circuit with port, light up switch + LED.
- Just in need of a look-over!
- Resistor check
- Wiring check please :)
- SMD Resistor
- Verification of Wiring
- Wiring check
- LED Fail?
- LED battery question
- 3.7v smart charger, where can I get one?
- Lens for a Tri-Cree
- Stunt Wiring Question
- My First PVC Saber...Electronics question
- I think my PC 3.5 is not right
- Series Vs Parallel? Brightness/functionality? Oh and batteries.
- -Need help for my first builds-
- Wiring question: MR/Force FX with momentary switch?
- Wiring check for a PC 3.5, recharge port, and a G/G/W LED
- PC3.5 RGB crystal chamber LED resistor values?
- Twin switch/ tri-color setup
- Wiring diagram check: PC3.5, RGB Tri-Rebel, Crystal Chamber LED, TCSS PLI
- New to saber building have a few questions
- Special effects...smoke
- Identify These Resistors
- Cree question
- LED Setup?
- Electronics for a Toy LS Sound Card
- Wiring a switch.
- Momentary Switch
- Most realistic hilts?
- Custom TRI CREE Help
- Color change without sound board wiring ( + momentary to latching converter)
- Short run time?
- Help! It broke!
- Feedback motor with PCv3.5 and R/G/RB tri cree question
- Color Extender, Two Blades, Two Batteries, One PC
- Momentary switch.
- Series or parallel?
- Better way to ask the question...2 batteries
- Resistor Questions
- Li-ion pack differences
- Cree XP-E2 too powerful for a Crystal Chamber?
- Crystal focus 7.5 and Cex wiring diagram
- Need help on first lightsabers wiring
- Ok, kind of confused about power requirements and wiring in general
- Wiring for ground on Recharge port and R.I.C.E.
- This feels like a stupid question
- Ultrasaber Vs. Makoto
- Ultrasaber upgrade help
- Building a combo Makoto AND Cree LED saber?
- Correct way to wire up rebel RGRb to Cf?
- Correct Resistors? Ohm's Law Understanding Check
- questions about av switches
- Need to find a battery holder
- I Need Help Constructing My First Lightsaber :?
- Look over of build plan, input please.
- Help with CF 7.5 PWM signals please
- Wiring diagram and resistor check please!
- I know my parts not my resistors, help?
- Wiring Diagram? Petit Crouton v3.5 + Color Extender
- New with all of this stuff. Wiring help.
- Am I Correct?
- resistor question
- Wiring question. Please help.
- Wiring Schematic Critique?
- Please help! Quick question about my wiring/resistor set up with Tri cree BBW
- Total noob (and I did read through threads!)
- How "warm" is your LED?
- Momentary to Latching switch converter issue....
- Smallest wire suitable for main LEDs?
- Nano Biscotte and LED module
- Forward Voltage?
- Resistor check appreciated. Need to order soon.
- AV LED Help
- 2nd Lightsaber Need Help Wiring Tri-Cree LED
- Red Dot 16mm AV Long Momentary Switch
- 1st saber build
- Battery Voltage for Resistor Calculations
- How to get a very bright crystal ??!
- Resistor/battery choise help
- First build; Tri-Cree, Biscotte, FoC, Recharge. Would like 2nd opinion on my wiring
- FOC resistor
- Wiring check, Prizm with RGB-Rebel Star
- Dual R.I.C.E. port question
- New Wiring Diagram/Wiring check for RGB PC 3.5 with Recharge and RICE ports
- RC port question
- PCv3.5 Overheating
- Need Help with Econo soundboard
- super new need help.
- Please check my wiring diagram and make sure im good to go
- Petit Crouton has resistors pre-soldered to accent LED pads
- NBv2 + Recharge Wiring Check Please
- Petit crouton, Tri Cree, color mixing and ext HELP
- Nano Biscotte not going into sleep mode..
- Multiple Questions
- Momentary-latching converter switch question
- Battery Question
- Is my batery pack dying?
- Latching AV Switch
- battery pack
- Custom RGBW driver--couple questions
- Different type of switch question
- Wiring illuminated switch without buckpuck?
- 12W Wiring Guidance
- LED Misfire
- 16mm Switch Wiring Help
- Double check my wiring please
- Basic Saber with TriCree for (purple) electronics help
- Please check my wiring schematic (Buckpuck, Rebel Star, Recharge port, Hasbro)
- Current PLI design / first post ever
- Recommendations on Li-ion (cannot purchase TCSS Li-ion RE Int mail restrictions)
- Crystal Focus 7 - Colour Extender - Quad LED - 7.4 V - PLI
- Looking for some Soldering Tips and Help??
- Should I parallel wire a second battery?
- Wiring issue PC 3.5 pseudo color mixing
- Wiring check, please.
- 3.7V battery VS 7.4V pack...
- New to wiring, need some help!
- Battery with JST connector
- Can you wire a Tri LED to a MR Vader Saber??
- New builder LED/power question
- Wiring concerns for a Cross Guard Saber.
- Ultrasabers Stock Switch Replace with AV switch without LED function.
- Verifying resistance math
- Schematic review
- PC 3.5 FOC wiring vs color mixing
- 16mm LED switch wiring
- Quick resistor question
- Wiring Help
- Soldering woes
- Question about Luxeon Tir-Rebel Wiring
- Heat sink trim
- Resistor Question
- 12mm switch led wired to power inticator? Nb v2
- First time help. Not Lazy, just worried.
- Photon Blade use a CREE RGB, BBW, or quad?
- Check my math please?
- Crystal Focus kill key question.
- Rebel star help
- Saber won't turn off
- Testing my saber electronics
- Math Check Request
- Polarity reversed?
- Stuff THIS in THERE!!!???
- Recharge port hole size
- Wiring Check
- Ezra inspired saber build for son...sound board advice?
- Wiring an RGB Tri Cree XPE 2
- Ultimate Fx Led strip
- Setup not flashing on clash
- Parts Check
- Tri LED Orange Red x2 plus White, resistors
- New Hasbro Anakin/Vader Conversion
- Help with wiring, lots of questions
- Tri-cree wiring help
- PC3.5 Single Cell and Colour Xtender RGB cree
- Wiring help with NB, FoC, JST
- Needing Help checking my wiring. First time build.
- Nano Biscotte v2 Wiring Check.
- First time builder, LED not working?
- First build; wiring check
- NB V1 wire check
- wiring help needed (Ultimate FX sabre sound board)
- CF V7.5 Wiring Check
- Wiring check
- Wiring AV latching illuminated switch
- CF wiring check/ mock up assistance
- FoC wiring w/ resistor
- 6V Battery and 12V AV latching switch
- Problem: Cree LED on even when turned off. Nano Biscotte
- First try at CF7 + CeX, need advice please
- BuckPuck
- New To Wiring PRIZM and Resistors
- Running a staff on a single NB
- Maths check please
- Old P4 resistor check
- Nano Biscotte Drive Parameter and Battery Help.
- LED bar graph CF v7.5
- Sw Rebels Vador soundboard + Seoul Z P4
- SPDT switch use?
- How do you guys estimate wiring length?