- Rechargeable batteries????
- How do you wire in accent leds?
- noob has question on direct driving leds...
- CF 4.1 with P4 Red LED question
- Need an opinion or a direction.
- switch question
- Working Bargraph
- Latching relay w/ momentary to power on/off MR board?
- Newbie with a stray wire, help him not get fried
- SPDT switch with Corbin driver and Ultrasound
- Is there any reason that I wouldn't be able to use a button with an LED in it?
- rgb resistored setup.
- The Joe Puck Problem
- K2 or P4
- Weird recharge phenomenon?
- Light dagger hilts
- Prolite Puck
- Need Help converting my ESB Graflex
- Possible Endor Rebel RGB Optics Solution
- Batteries and chargers
- Everything I ever wanted to know about relays but was afraid to ask
- I. Am. Cursed.
- BreadBoard
- BuckPuck use
- Seoul P4 with power on LED
- Anyone ever given this LED a thought for an RGB solution?
- need help on my saber
- Battery Charger?
- DPDT switch help
- HELP on voltage regulator
- Need some info on the ver2 3w driver
- Switches, Switches, and more Switches?
- Is this right?
- Everything I ever wanted to know about potentiometers but was afraid to ask
- Vibration motors: a solution for mounting...
- Wiring 2 accent LED's to a DIY K2 kit?
- Need help on wiring a tri rebel
- Need some help with P4 and MR board
- Anticipating my new saber...
- Wiring the mom tactile switch
- Can anyone recommend a good first Multimeter for saber building?
- can some one recommend a good variable power supply
- review diagram please..
- noob with question about buckpucks
- LED size question...or how small can you go?
- powering Luxeon V
- Wiring 2 led's & 2 motors to a US 2.0, please?
- LED wiring inquiry
- wiring 'weirdness'..
- hasbro clash sensor
- SUPER vibrating motor of Makoto's lightsaber
- Complete Wiring Schematics
- us 2.0, led & motor in parralell. But i messed up!
- Trustfire brand battery voltage
- decent purple from fx construction kit mod?
- Wiring Question for US2.1
- Best way to mount the tactile switches...?
- My Super ONE board of luxeon LED
- what wire should i use?
- Question about the DPDT illuminated switch
- Schematic Check: Prolight RGB
- Will this be enough of a heatsink?
- Corbin w/resonator, lighted switch, + clash sensor ?
- n00b alert !
- Schematic Check: EL Hilt with DPDT Green switch...
- Need a potentiometer for volume control
- Need 3V relay for buck puck and hasbro combo
- Need help with problem with recharge port
- LedEngin RGGB and RGBA 10-Watt LEDs are hot--literally
- 5mm LED strip wiring
- Lens and holder
- Pvc hilt
- Force FX Construction Kit, Corbin driver, RGBA, reed relay
- CF wiring question.
- Buckpuck or resistor?
- An older effect
- Constant Current circuit
- Cheapy Hasbro Anakin
- li-ion battery pack is larger than it was described to be on website, need help
- A special Paste.
- selecting solder
- Can someone help me figure out resistors?
- Multi-position slide switches?
- Everything I ever wanted to know about microcontrollers but was afraid to ask
- Couple of (possibly dumb) questions...
- Detonator wiring
- Wiring with a soundboard and a Lux I
- Two-blade saber with one MR board and two battery packs?
- Missing the LED connector on my MR board
- Dim LED light?
- Why this resistor?
- Battery packs
- Heat and voltage regulators?
- Wiring multiple LEDs/switches?
- Amber LUX III Not Very Bright - Am I on the Right Track?
- switching the switch in the kit
- Did I come across a mutant FX board?
- battery pack question
- Forward voltage/lumens?
- Splicing wires for multiple LED's
- Ultrasound 2.5 question
- CF Wiring question
- Makotsois saber in a mace hilt
- LED Strip and LED Luxeon III?
- US 2.5 Wiring Schematic
- 10w Seoul P7
- Fancy Switch with Sink tube
- how to recharge 6v for seoul p4?
- LED lit pummels?
- Recharging Batteries, Port and Kill Key Question
- I think im doing something wrong but it looks right
- MHS Crystal Chassis Saber
- Double saber LED powering/wiring.
- Hilt Wiring Question
- MR Yoda with Ultrasound?
- PURPLE!!! No RGB or Lee Filters ALLOWED!
- Power Extender Board?
- Amber led
- What switch should I use?? touch or illuminated?
- tonfa sabers i would like instructions on makeing them
- Illuminated switch with hasbro economy board?
- Need some help for a very unique saber.
- US 2.5/Mom Illuminated switch wiring questions
- Complete Setup Question
- Buckpuck and Ultrasound 2.5
- What Gauge wire do I need for a Mako saber?
- Windowed Hilt using only MHS parts...would it work?
- resistorless LED
- Battery Life
- P7 and 900 lumens
- UltraSound Board Led driving question
- My next saber
- Problem with battery pack temporarily losing voltage
- gauge question
- Wiring check please.
- Best way to keep 6v
- RGBA Experts
- Wiring For Hasbro Sound & Luxeon III
- Adjustable LED Driver
- Just need to make sure
- TROUBLESHOOTING -- General Theory of Operation
- Does this work with resistor?
- Luxeon 3W driver V2 resistor?
- Is this heatsink overkill for a lux v
- Recharge port WITHOUT rechargeable batteries?
- How to build a Crystal Chamber?
- So what do we do now...
- First Projects
- Luxeon IIIs, ands Vs are to be discontinued?
- Hilt diameter question
- For you Lumen Lovers
- What is needed to make accent LED to blink?
- Luxeon Rebel Wiring Help.
- Copper?
- clash sensor schematic
- How to instal adjustable Led driver V2
- My LED on my Hasbro Yoda will not turn off.
- Graflex Replica to Luxeon III
- Guarded Style switch hole question
- Using Makototsai Leds in MR Sabers
- how to determine suitable LEDs?
- Wiring 2 battery packs in parallel
- Trustfires and recharge port
- Possible Set up in my latest saber
- Just doing some research and questions
- Not the right amps on my meter.
- hot batteries when recharged and sound issues
- RGB LED Wiring
- New saber design (advice needed)
- Wiring and resistor issue for Caine...
- Need Longways Li-Ion 18650 7.4V 2200 mAh Batt Pack
- Wiring schematic approval
- Battery
- possible short?
- New PWM clash flash board
- Red LED verification question
- I fried Yoda.....taste like chicken!!
- PCB for 7.4 volt pack.
- Mylar Tape?
- Clash-on-Flash without a Crystal Focus?
- buckpuck alternative
- Cylon Saber?
- Need a battery solution...
- Turning on a sound board and led with a DPDT switch
- low current P4's
- Voltage restrictor / regulator - Battery question???
- P4 not fully lit even with a relay hooked up
- Lux vs. Led String
- Transistor Question
- rotary switch question
- Dumb Question
- hows mako do it???
- Shop shock sensor
- Picaxe 18Pin Question
- New LED Bubble strip wiring
- AV switch, MR fx board, and recharge port wiring
- 1x 3.7v Li-Ion or 3 AA Ni-MH??
- NiMH rechargeable batteries and overheating
- how to wire a BuckPuck with a latching illiminated switch?
- Wiring Check Please
- Ideal set up advice needed
- conflicting buckpuck advice?
- Speaker Amplifier
- Royal Blue Rebel wiring...
- Blown up Luxeon III?
- Illuminated Switch & Accent LED Wiring
- US 2.5 wiring issues
- Got my Graflex in the mail......now what?
- Led upgrade question
- Rebel green LED and Crystal Focus
- Magsafe Recharge Port
- The Rebel Star
- Voltage to MR board
- Drilling the hole for the switch?
- Newbie Question
- How to wire an accent LED with a built-in resistor>?
- will this design work for a luxeon custom built hilt?
- what is a sink tube used for?
- Illuminated Switch and Switch Bezel Nut?
- Adjustable LED driver question
- Need Help! 7.2V, illuminated switch, RB rebel star, buck puck, hasbro board.
- Li-Ion PCB Question
- Where does the resistor go??
- Hilt made of Manzanita! Need help to make it a saber.
- First Saber Electronics Help
- RGB lightsaber
- RGGB Led question
- Cheapo Hasboro Board And Pololu Board Tact Switch
- 12v DC LED systems
- How to increase voltage?
- 700 buckpuck wire issues
- batt. pack
- My saber turns on while charging while configured for kill
- Hasbro sound + 2accent LEDs
- Did I just fry my rebel?
- Brightness: LedEngin 10W vs. Seoul P4
- Wiring a Hasbro sound board, buckpuck, P4 and recharger
- Smaller heat sink?
- Graflex switch question. Momentary switch with MR board?
- 8 AAA battery holder dimensions
- How to wire an RGB?
- Noob Swith Help 1st Saber
- New LedEngin RGBA saber project with MR Vader sound board
- NiMH Custom Pack Issues, HELP!
- Can I Do This Without Any Explosions?
- FX Yoda showing 6v Do I need a Buckpuck?
- Yoda fx lightsaber
- do i need thermal tape?
- Makoto superONE soundboard
- Anakin convertion questions