- Brighter Blade Ideas
- Common misconception...
- Affixing 1" to 3/4" Reducer
- vader blade lenght ???
- blade for mace
- Something I think I'm seeing with Amber LEDs...
- Nylon blade question
- blade question
- Removing film from inside a polycarbonate blade?
- Led ladder design question.
- Best Blade for Kids (weight vs durability)
- yellow blades run on what?
- In your oppinion, What is the "best" blue luxeon III?
- blade film substitutions
- corbin or tcss?
- Film versus Diffuser
- poly and diffuser film
- Blade assembly question
- 3/4 inch verses 1 inch blades
- Keeping the tip on
- Saw this product and thought to share.
- How Do You Cut Polycarb BLADES??
- Charity bazaar SABER
- Is it cellophane, or is it polypropylene film I'm looking for?
- some luxeonIII questions
- Luxeon 3w driver V2 - Ramping?
- Tip Removal
- Question about the bullet tip
- Ultra edge
- Blue silicone rubber tube diffuser
- question about blade length.
- UltraEdge Blade
- How to construct an LED Blade (or, at least, how I do it)
- My saber play on local movie~
- Blade holders?
- 3/4" pvc coupling
- 1.25 sink tube
- blade holder
- led whip
- Thinwall and Thickwalled Dimensions
- What Thickness PolyP do You use for Your blades?
- Tcss diffuser with thin walled poly?
- blade lock-in ideas
- Tim's Colored PolyC - post picture of it here
- Anyone played with the new colored polyC's, yet?
- Seoul P4 vs. Lux III pics
- Grayvens springloads blade project?
- UltraBlade Thick-walled?
- "Special Fiber optic blade"??
- what would this do:
- Which blade?
- Ultra Edge Blade Tutorial
- Flicker circuit for LED-String
- Seoul P4 with filter or Amber LED?
- 5 or 10 degree lens?
- Corbin Film - Double or Quad?
- Complete Blades?
- MR Maul VS Makoto V2 red saber with 2 0 board
- TCSS Battle Blade Question
- drilling the the blade tip mirror?
- Sephiroth Blade
- Black blades?
- Thin and Thick walled blade film difference?
- Has anyone used this for blades?
- Simple question About part swapping.
- TCSS Color Discs
- Need advice for a completely custom blade..
- swapped out your LEDs?
- Thick vs Thin
- Thick and Thin - Sith and Jedi
- Sanded blades and duel durability
- noob blade advice after research for final decision
- cutting Polycarbonate
- photography of sabers
- And again with the flickering
- Duel Color LED sabers
- How to upgrade Anakin ANH
- film wraps
- white diffuser vs poly gift wrap
- Noob in need of help!
- A step in evolution
- Optics ?
- K2 or Luxeon III?
- Keeping Blade in Hilt?
- colored film?
- Most even blade poll
- Best Method For Sanding a Blade?
- Matching colored polyc blade tip
- Question about Lux V and Rebel I've been wondering about
- Blade Choices And Help (Im New to this)
- TCSS Translucent white 3/4" blade v. 1" UltraEdge blade
- Hasbro Obi TPM upgrade with led strip and single led
- How to make a dual core blade
- MR Maul V3 upgrade with led strip and single led chip
- My lightsaber in local TV show
- RGB LED question
- Tip shadows
- Black Blade development...
- Rebel Tri-star
- Blade Supplies
- Purple blade optics question
- Blade retention
- UltraEdge vs building your own blade
- Blade Opinion Question
- polycarb tube filled with silicon?
- Master Replicas LED Change
- How not to build a blade?
- sanding blades
- Sanding a transwhite blade.
- What do you do with your blade at cons when you are not using it?
- Frosted lenses
- Blade question.
- Black Light (not what you think)
- Blades
- N00b Question
- Another RGB LED question
- FX Yoda upgrade with 29.5 V3 blade
- Blade film and things that aren't blades
- LED Diffuser Question
- Dark purple blade
- Advice on first saber project.
- Yet another RGB(A) LED question...
- Safety foam lightsaber
- Black lightsaber of adhesive tape.
- Purple RGBA blade
- Purple RGBA schematics
- TCSS vs Corbin vs home built blade
- Smaller LED Stars?
- Cancellation of FOC with GG card using RGB
- Color change lightsaber with light-up effect
- 10w RGBW using 7.2v battery packs@900 mAh
- Anyone still have the colored PolyC?
- SSR90 2 amp comparison
- post the light whip in here that is Ok?
- Black lightsaber of Sun Control Film
- Using a thumb screw to secure a blade?
- Corbin power up?
- Master Replicas/Hasbro Conversion kit blade OD?
- First blade.
- The black blade. I think I have a fresh idea.
- No More "Black Lightsaber Blade" Threads
- color mixing with colored Poly-c tubes?
- Trouble
- Red Rebel Led
- Colored cello wrap
- color question
- threading PolyC?
- Question about Trans White Battle Blade
- Blade thickness question
- blade effect help
- can i run a red p4 on a 1000ma buck puck?
- How to make blades
- not what a 40in thick special white blade should be used for...
- star thermal tape pad
- UltraEdge + cellophane?
- choosing batteries for best led performance
- Getting a blade tip to light up fully?
- LEDengin RGBA direct drive wiring and resistor placement
- Diffusers and some ideas (and questions)
- Led Engin RGBAW Problem...
- Curved Blades?
- Wiring - "build you're own lightsaber" board
- Thoughts on blade sizes
- A blade question
- 3/4" Tips
- Tri-Rebel wired for silver.
- Silver Lee Filter?
- I kinda like it.
- Size of blade for LED blade holder???????
- Mace Mindu blade
- A quick question on The translucent white battle blade
- some short basic questions
- Simple do it yourself safety plug
- White poly c blade(mid grade) vs white poly c (heavy grade)
- Trans White PolyC Thin Blade with Corbin Diffuser
- Pointed Blade tip vs original tip?
- Double blade saber with 2 different colors
- Installed blade length
- What am I doing wrong- can't get blade to light up? (pics)
- question about LEDs lighting a blade thoroughly.
- Stunt blades???
- Best blade setup for white LEDs?
- obsidian sound board and rebel star or seoul P4 LED modules
- [project] Led strings blade with arduino
- Diffuser replacement for MR Obi Wan Sith
- I will NEVER, EVER, do this again. >=[
- Cellophane vs. Polypropylene
- Difference between Polycarbonate and Trans White PolyC blades?
- I want to buy a lightsaber
- Converting an ANH 2010 Luke Skywalker Removable blade
- Using a Trans White Tube as Blade Diffuser
- Solid Polycarbonate Tube Blade
- Thick or thin for short blade
- Where can I find this led strings?
- foam diffusor for LED-string blade - hard to find?
- Basic Saber - 4 AAA batteries
- PVC Lightsaber?
- opinion on best (and cheapest) lightsaber blade
- Question about swapping Ledengin diodes in 10W assemblies
- Blade Brightness Redesign
- Old blade post
- 2005 MR Darth Vader Lightsaber replacement blade?
- What's the deal with blade tips
- Tri-Cree blade not mixing very well.
- Building your own Blade = Pain in the ...
- Photon green blades
- Nerf lightsaber blades!
- Consistent blade luminosity
- Blade Development Questions
- in search of a proper blade.
- 12 watt leds with nano biscotti or ultimate fx?
- Has anyone ever tried a trans purple blade?
- Built my first saber, but the blade seems a little dim.
- Padawan blade length?
- Colored polyc tube (Transparent Smoke)
- Best saber for duel video
- Iridescant Gift Wrap
- Tapered (not bullet tip) blades ever attempted?
- Clear or Colored Blade, with White or Colored LED? (Day Cosplay)
- so frustrated
- Most Common Blade Type?
- Build a blade tip
- Quad rebel
- Multicolor light source?
- Blade thickness and tolerances
- Blade thickness and tolerances
- Blade ideas
- Blade with Plexiglass? (HELP)
- Blade Length and Balance
- Keeping blade film in place
- LED comparisons
- Blade into holders
- Are there any blade holders that would fit inside a 1 inch sink tube?
- Blade Film vs Blade diffuser help.
- Sanding blade material
- Best blade for Green/Green
- Blade Tip Friction Fit?
- 32" of 1.5 diameter optics grade acrylic...what to use it for....
- Why LCD Backlighting Won't Work for a Black Blade
- Preferred blade length
- curved saber with katana wrap
- Will TCSS blades fit in an Ultrasabers hilt? Also questions on photon blades.
- A recommended blade length please?
- Just got my photon blade in-it's super weird and cool.
- Ultra Film/GeluKhan film blades?
- Anyone do anything cool with a UV LED -- Lightsaber build?
- Blade Question
- LED module/ blade holder temperature
- Blade Help
- New to sabers and need help