dustunite's Albums

dustunite's Albums

  1. This was made for my daughter, I'll let you guess what her favorite color is. The design is about a simple as you can get but it still has a econo board, 9w RGB (mixed for purple), blue AV switch (would have liked purple but haven't got into taking them apart yet) and single 3.7v lith with in pommel recharge port. Oh and baked purple accents.

    Dust 's youngling

    Photos
    4
    Last Photo
    06-16-2012, 03:16 PM
  2. This is my sith saber. Its just a single 1 1/4" sink tube with 1 1/2" machined aluminum blade holder and pommel. It has hand formed epoxy putty in the ancient horn style and leather grips. Also an econo board, red cree, and crystal quarts chamber.

    Dust's Sith Legacy

    Photos
    5
    Last Photo
    06-16-2012, 03:08 PM
  3. This is a heavily weathered jedi saber. The main saber is painted and sanded but for the shroud (its hard to tell from the pics) I brushed the chrome just enough for a slight brass to show through in areas and around the edges. I wanted to look very used. It has an Econo board, 4.8 Nimh pack, and coustom box with AV switch, PLI, and recharge port.

    Dust's 2nd TOR

    Photos
    5
    Last Photo
    06-16-2012, 02:38 PM
  4. This was my first attempt at a heavily weathered saber. It has a PC 1.6, LEDengin RGBA (mixed for purple), red and blue AV switches and in pommel recharge port. This ended up[ a tight build, after the switches I had about 3 1/2" for PC and batt pack before the speaker holder and resonance chamber. Its 1.5" OD by 10" and from blade holder to second switch only has 1" ID.

    Dust's Burnout

    Photos
    5
    Last Photo
    06-16-2012, 02:20 PM
  5. This is made from an oiled bronze sink tube. It has a econo board, red cree, bass speaker, and custom crystal chamber. the crystal itself is quiet cool, it came from a huge geode my company was turning into a coffee table. the crystal actually is red and fades from amber to clear (not sure exactly what kind of stone it is).

    Dust's Oiled Bronze

    Photos
    3
    Last Photo
    06-16-2012, 02:06 PM
  6. This was my first Igniter build and it has the true color board, Ledengin RGBA, 7.4V lith pack w/in pommel recharge port, 2x12mm blue AV switches, and custom milled grooves for the grips from the TCSS.

    Dust's w/Igniter

    Photos
    5
    Last Photo
    06-16-2012, 01:57 PM
  7. This is my TOR style saber. It has a PC 1.6, royal blue rebel, 7.4v lith pack, one of TCSS boxes but with custom switches and kill key, and crystal chamber with a blue lit onyx crystal.

    Dust brass and aluminum

    Photos
    5
    Last Photo
    06-16-2012, 01:46 PM